ZHENHUA 650T Two Plates/Double platen IMM For Chair Producing

Short Description:

Large two-platen injection molding machine’s advantages :

(1)Large opening stroke: The die opening and locking stroke is not limited by the structure, better for deep cavity product, such as automobile manufacturing, aerospace, furniture manufacturing and other industries.

(2)High precision clamping force control: clamping full hydraulic control, clamping force linear control, four pull rod force balance, accurate control.

(3)Fast mold opening and accurate positioning: The use of low pressure fast opening and closing mold cylinder, not only can achieve fast and accurate positioning, but also can better protect the mold.

(4)High reliability and long life: inorganic hinge wear, and the clamping force repeatability is good, high stability, pull rod force uniform.

(5)Saving space: clamping unit is shorter than traditional toggle type machine.

Send email to us

Product Detail

Product Tags

Chair Product Picture

ZHENHUA 650T Injection Molding Machine Produce Chair01 (3)

ZHENHUA 650T Injection Molding Machine Produce Chair01 (4)

Technical Parameter

Technical Parameter		Unit	ZH-650T-DP
Technical Parameter		Unit	A	B
Injection Unit	Screw Diameter	mm	80	90
	Injection Stroke	mm	450	450
	Theoretical Injection Volume	cm³	2260	2860
	Injection Capacity	g	2079	2631
	Injection Pressure	Mpa	205	173
	Injection Speed (50Hz)	mm/s	115
	Melt Speed	rpm	10-200
Clamping Unit	Clamping Force	KN	6500
	Tie Rod Spacing	mm	960*960
	Min.Mold Thickness	mm	350
	Max.Mold Thickness	mm	Customization
	Toggle Stroke	mm	1300
	Ejector Stroke	mm	260
	Ejetor Force	KN	15.5
	Thimble Root Number	pcs	13
Others	Amount Of Oil Used	L	750
	Max.Pump Pressure	Mpa	16
	Pump Motor Power	KW	48+30
	Electrothermal Power	KW	25
	Machine Dimensions(LWH)	M	8.22.72.6
	Machine Weight	T	36

The Application of Injection Molding Machine in Chair

Some common parts that injection molding machines can produce for chairs include:

Seat shell: The injection molding machine can manufacture the seat shell of the chair. It can be injection molded into seat shells of different shapes, colors and sizes according to design needs. Legs: Injection molding machines can produce chair legs, including four upright legs and stabilizers. The legs can be injection molded into different shapes, heights and strengths as required.

Armrests: Some chairs are designed with armrests, and injection molding machines can manufacture these armrests to match the design requirements.

Screws and nuts: Chairs require screws and nuts to connect different parts, and injection molding machines can produce these screws and nuts.

Cushions and back cushions: Chairs usually require cushions and back cushions to increase comfort. Injection molding machines can produce these cushions in different thicknesses, elasticities and colors as needed.

Injection molding machine components

Hydraulic and pneumatic components:

Solenoid Valve	YUKEN(TAIWAN)	Oil Pump	SUMITOMO(Japan)

Oil Motor	INTERMOT	Oil seal	NOK(Japan) or Italian oil seal

electronic component:

Controller	ARCUCHI	Servo Motor	Guilin Stars Technology,China
Electronic ruler	GEFRAN/WOOG/Same Quality Product	Transducer	GEFRAN/Same Quality product
proximity switch	FORTEK (TAIWAN)	Limit switch	PIZZATO(Italy）
Switch	Schneider, Taiwan Shilin, Fuji and other brand components