ZHENHUA 120ton Injection Molding Machine for Balloon Inflators Making

Short Description:

Advantages of a standard injection molding machine

Easy maintenance: The use of hydraulic systems, parts and maintenance tools are relatively easy to obtain, and the maintenance cycle is short.

The material of the balloon inflator：

The plastic parts of the balloon inflator can be made of PE, PP or PVC. These materials have good durability, toughness and chemical stability, making them ideal for use in the manufacture of parts for inflatable cylinders. The exact material used depends on the design and manufacturing requirements of the product, as well as the desired functionality and performance.

Send email to us

Product Detail

Product Tags

Balloon Inflators Product Picture

ZHENHUA 120ton Injection Molding Machine for Balloon Inflators Making-01 (3)

ZHENHUA 120ton Injection Molding Machine for Balloon Inflators Making-01 (4)

Technical Parameter

Technical Parameter		Unit	ZH-128T
Technical Parameter		Unit	A	B	C
Injection Unit	Screw Diameter	mm	36	40	45
	Theoretical Injection Volume	OZ	6.8	8	10
	Injection Capacity	g	152	188	238
	Injection Pressure	MPa	245	208	265
	Screw Rotation Speed	rpm	0-180
Clamping Unit	Clamping Force	KN	1280
	Toggle Stroke	mm	340
	Tie Rod Spacing	mm	410*410
	Max.Mold Thickness	mm	420
	Min.Mold Thickness	mm	150
	Ejection Stroke	mm	90
	Ejector Force	KN	27.5
	Thimble Root Number	pcs	5
Others	Max. Pump Pressure	Mpa	16
	Pump Motor Power	KW	15
	Electrothermal Power	KW	7.2
	Machine Dimensions (LWH)	M	4.21.141.7
	Machine Weight	T	4.2

The Application of Injection Molding Machine in Balloon Inflators

The injection molding machine can produce spare parts for balloon inflators including but not limited to the following parts:

Cylinder: The main part of the inflatable cylinder, which is usually injection molded by an injection molding machine.

Plug: used to close one end of the inflatable cylinder to prevent gas leakage. It is also injection molded.

Piston: The component used to push air into the inflatable cylinder, usually injection molded by an injection molding machine.

Sealing ring: Installed between the inflatable cylinder body and the plug to ensure sealing during inflation. It is usually a rubber product and can be injection molded by an injection molding machine or purchased outsourced.

Other accessories: such as connecting pipes, valves, etc., used to connect the inflatable cylinder and other equipment. These accessories are usually purchased rather than produced by the injection molding machine.

Injection molding machine components

Hydraulic and pneumatic components:

Solenoid Valve	YUKEN(TAIWAN)	Oil Pump	SUMITOMO(Japan)

Oil Motor	INTERMOT	Oil seal	NOK(Japan) or Italian oil seal

electronic component:

Controller	ARCUCHI	Servo Motor	Guilin Stars Technology,China
Electronic ruler	GEFRAN/WOOG/Same Quality Product	Transducer	GEFRAN/Same Quality product
proximity switch	FORTEK (TAIWAN)	Limit switch	PIZZATO(Italy）
Switch	Schneider, Taiwan Shilin, Fuji and other brand components