ZHENHUA Injection Molding Machine Production of Solar Lamp Housing

Short Description:

Standard injection molding machine’s advantages:

Strong production capacity: by adjusting the injection speed, pressure, temperature and other parameters, you can quickly inject a large number of products, improve production efficiency.

The following are common solar light housing materials:

Plastic: PE, PP, PVC and other plastic materials are commonly used in the production of solar lamp casings. These materials have good weather resistance, corrosion resistance and impact resistance, are also relatively lightweight and low-cost, and are suitable for most solar lamp housings.

Send email to us

Product Detail

Product Tags

Solar Lamp Housing Product Picture

ZHENHUA Injection Molding Machine Production of Solar Lamp Housing-01 (3)

ZHENHUA Injection Molding Machine Production of Solar Lamp Housing-01 (4)

Technical Parameter

Technical Parameter		Unit	ZH-218T
Technical Parameter		Unit	A	B	C
Injection Unit	Screw Diameter	mm	45	50	55
	Theoretical Injection Volume	OZ	13.7	17	20
	Injection Capacity	g	317	361	470
	Injection Pressure	MPa	220	180	148
	Screw Rotation Speed	rpm	0-180
Clamping Unit	Clamping Force	KN	2180
	Toggle Stroke	mm	460
	Tie Rod Spacing	mm	510*510
	Max.Mold Thickness	mm	550
	Min.Mold Thickness	mm	220
	Ejection Stroke	mm	120
	Ejector Force	KN	60
	Thimble Root Number	pcs	5
Others	Max. Pump Pressure	Mpa	16
	Pump Motor Power	KW	22
	Electrothermal Power	KW	13
	Machine Dimensions (LWH)	M	5.41.21.9
	Machine Weight	T	7.2

The Application of Injection Molding Machine in Solar Lamp

Injection molding machines can produce many spare parts for solar lights, including but not limited to:

Shell and lampshade: Solar lights usually require waterproof, high-temperature and weather-resistant casings and lampshades.

Brackets and bases: Solar lights need brackets and bases to support the lamps and be fixed on the ground or wall. Injection molding machines can produce plastic brackets and bases.

Lenses and reflectors: The lenses and reflectors of solar lights can improve the focusing and scattering effect of light. The injection molding machine can produce transparent or translucent plastic lenses and reflectors.

Battery compartment and control box: Solar lights need to install a battery compartment and control box to store and manage electrical energy. The injection molding machine can produce the plastic shell of the battery compartment and control box.

Threaded joints and connectors: Solar lights need to be connected and fixed with other components, and injection molding machines can produce plastic threaded joints and connectors. Cable Protective Sleeves and Seals: Cables for solar lights need to be protected and sealed, and injection molding machines can produce plastic cable protectors and seals.

Injection molding machine components

Hydraulic and pneumatic components:

Solenoid Valve	YUKEN(TAIWAN)	Oil Pump	SUMITOMO(Japan)

Oil Motor	INTERMOT	Oil seal	NOK(Japan) or Italian oil seal

electronic component:

Controller	ARCUCHI	Servo Motor	Guilin Stars Technology,China
Electronic ruler	GEFRAN/WOOG/Same Quality Product	Transducer	GEFRAN/Same Quality product
proximity switch	FORTEK (TAIWAN)	Limit switch	PIZZATO(Italy）
Switch	Schneider, Taiwan Shilin, Fuji and other brand components